PART NAME.. 6 FLUTE PCD REAMER
INDUSTRY..... Automotive
END USER..... Toyota
NOTES...........STF is able to regrind and retip reamers from any manufacturer.

PART NAME.. PCD STEP REAMER/CHAMFER
INDUSTRY..... Automotive
END USER..... non-disclosure
NOTES............ Multi-step reamers such as this one take 12 weeks or longer from some PCD vendors and can cost thousands of dollars. STF follows a 6 week "design to delivery" cycle, with re-orders in 4 weeks or less.

PART NAME.. PCD COUNTERSINK
INDUSTRY..... Aerospace
END USER..... Lockheed Martin
NOTES........... STF produces a wide range of PCD countersinks for hard to machine materials such as the new CFRP composites used in the Aerospace industry.

PART NAME.. PCD BALL NOSE ENDMILL
INDUSTRY..... Aerospace
END USER..... non-disclosure
NOTES............ STF's PCD endmills are available in straight or ball nose style in sizes from 4 MM to 40 MM. Standard or Custom sizes are shipped in 4 weeks or less.

PART NAME.. 4 FLUTE PCD REAMER
INDUSTRY..... Automotive
END USER..... Toyota
NOTES............ Our PCD reamers are manufacturered to micron tolerances and shipped with either two or four flutes, with or without coolant, in any size, in 4 weeks or less.

PART NAME.. PCD DRILL COUNTERSINK
INDUSTRY..... Aerospace Assembly
END USER..... Northrop Grumman
NOTES........... Our combination PCD Drill and Countersink for composite aircraft produces more holes per dollar than any other cutting tool material.

PART NAME.. STF-10546
INDUSTRY..... 3 Step PCD Reamer
END USER..... non-disclosure
NOTES............ This 7" long reamer produces 3 diameter sizes and saved the end user thousands compared to their previous vendor.

PART NAME.. STF-10536
INDUSTRY..... Medical
END USER..... non-disclosure
NOTES............ STF can produce PCD tipped drills as small as .063".

PART NAME.. 2 FLUTE SCD ROUTER
INDUSTRY..... Acrylic
END USER..... non-disclosure
NOTES............ This Single-Crystal Dimond 2 flute router produces a mirror finish on plastic, aluminum any nearly any other non-ferrous metal.

PART NAME.. VEINED PCD DRILL
INDUSTRY..... Aerospace
END USER..... non-disclosure
NOTES........... STF is able to produce PCD tipped drills in a helix. This process, similar in effectiveness to "vein technology" allows for easier chip and dust evacuation.